Stainless Steel 330 Strips, UNS N08330 Strips Supplier & Exporter

STAINLESS STEEL 330 STRIP GENERAL PROPERTIES:

Stainless Steel 330 Strip is an austenitic, nickel-chromium-iron-silicon alloy that has outstanding resistance to oxidation and carburization up to 2200°F with high strength. The excellent resistance to oxidation and carburization is provided by the high nickel and chromium content of the alloy, further enhanced by its silicon content. Stainless Steel 330 Strip ultra high nickel content of 34 to 37% also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres. Alloy 330 also has a low coefficient of expansion, excellent ductility, and high strength.

Harsh steel Export and Supply Stainless steel 330 strips capabilities include:

• Stainless Steel 330 Strip Annealed & Precision
• Stainless Steel 330 Strip thickness-0.1mm to 6.00mm
• Stainless Steel 330 Strip width-2.5mm to 1320mm (slit to close tolerances)

Harsh steel provides Stainless steel 330 Cold rolled mill finish strips such as:

• Stainless Steel 330 Strip 2D - cold rolled, heat treated, pickled.
• Stainless Steel 330 Strip 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
• Stainless Steel 330 Strip 2R(BA) - cold rolled, bright annealed
• Stainless Steel 330 Strip HR - hot rolled, annealed

STAINLESS STEEL 330 STRIP APPLICATIONS:

Stainless Steel 330 Strip is extensively used in high temperature environments where resistance to the combined effects of thermal cycling and carburization is necessary. Applications include:

• Chemical and Petrochemical Processing: cracked ammonia components, petrochemical furnace parts, heat exchangers, flares, etc
• Thermal Processing: heat-treat furnace containers & compartments, high temperature fans, salt pots, etc
• Ore Processing: perlite system and equipment
• Power Generation: boiler fixtures, gas turbine components, etc

STAINLESS STEEL 330 STRIP VALUE ADDED SERVICES:

• Need a special length?
  • We can custom level 3/8″ thick x 72″ x 186″ from our plate line to reduce scrap
• Polish plate inventory available
  • We supply #4, #6, and #8 mirror finish
  • Special polishes available
• Plate processing
• Dynamic water jet cutting
• Plate shearing
• Saw cutting
• Plasma cutting and high quality plasma cutting
• Machine cut rings and discs

STAINLESS STEEL 330 STRIP CORROSION RESISTANCE:

• Provides high level of corrosion resistance especially with regards to oxidation, carburization, and nitridation
• Has great oxidation resistance and resists scale formation up to about 2000°F due to its chromium and nickel content
• Excellent resistance to carburization due to its 34 to 37% nickel and silicon content
• Exhibits resistance to nitrogen containing atmospheres where the oxygen content is low
• High nickel content also makes it highly resistant to chloride stress corrosion cracking and sigma phase embrittlement

STAINLESS STEEL 330 STRIP HARDENING:

• Alloy 330 will not respond to heat treatment; will only harden upon cold work

STAINLESS STEEL 330 STRIP MACHINABILITY:

• Rigid mounts, sulfurized lubricants, positive feeds and slow speeds are recommended for machining grade 330 stainless steel.

STAINLESS STEEL 330 STRIP WELDING:

• Grade 330 stainless steel can be welded using GAW techniques.

STAINLESS STEEL 330 STRIP HOT WORKING:

• Hot working of grade 330 stainless steel can be performed at 1149 to 1177°C (2100 to 2150°F).

STAINLESS STEEL 330 STRIP COLD WORKING:

• It is difficult to perform cold working in grade 330 stainless steel as the steel has high strength and work hardening rate. However, this steel can be cold worked using strong forces.

STAINLESS STEEL 330 STRIP ANEALING: -

• Grade 330 stainless steel can be annealed at 1121 to 1204°C (2050 to 2200°F).

Harsh steel Supplies and Exports Stainless steel 330 Strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -

Harsh steel provided the Specification of Stainless steel 330 strips as below: -

• Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
• Material can be supplied in coil or length form
• Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 330 STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.

Enquiry