Stainless Steel 316L Strips, UNS S31603 Strips Supplier & Exporter

STAINLESS STEEL 316L STRIP GENERAL PROPERTIES:

Stainless Steel 316L Strip is austenitic chromium nickel stainless steel. The higher nickel and molybdenum content in this grade allows it to demonstrate better overall corrosion resistant properties than 304, especially with regard to pitting and crevice corrosion in chloride environments. In addition, Stainless Steel 316L Strips provides excellent elevated temperature tensile, creep and stress-rupture strengths, as well as outstanding formability and weldability. SS 316L is the lower carbon version of 316 and is immune from sensitization; therefore, it is very frequently used in heavy gauge welded components.

Harsh steel Export and Supply Stainless steel 316L strips capabilities include:

• Stainless Steel 316L Strips Annealed & Precision
• Stainless Steel 316L Strips thickness-0.1mm to 6.00mm
• Stainless Steel 316L Strips width-2.5mm to 1320mm (slit to close tolerances)

Harsh steel provides Stainless steel 316L Cold rolled mill finish strips such as:

• Stainless Steel 316L Strips 2D - cold rolled, heat treated, pickled.
• Stainless Steel 316L Strips 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
• Stainless Steel 316L Strips 2R(BA) - cold rolled, bright annealed
• Stainless Steel 316L Strips HR - hot rolled, annealed

STAINLESS STEEL 316L STRIP APPLICATIONS:

• Food preparation equipment, especially in chloride environments
• Chemical processing, equipment
• Laboratory benches and equipment
• Rubber, plastics, pulp & paper machinery
• Pollution control equipment
• Boat fittings, value and pump trim
• Heat exchangers
• Pharmaceutical and textile industries
• Condensers, evaporators and tanks

STAINLESS STEEL 316L STRIP CORROSION RESISTANCE:

• Generally more resistant than 304 in range of atmospheric environments and many corrosive media due to the increased chromium
  and molybdenum content.
• Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 122°F (50°C).
• Considered resistant to potable water with up to about 1000mg/L chlorides at ambient temperatures, reducing to about 500mg/L at
  140°F (60°C).
• Usually regarded as the "marine grade stainless steel" – but is not resistant to warm sea water.

STAINLESS STEEL 316L STRIP HEAT RESISTANCE:

• Good oxidation resistance in intermittent service to 1600°F (870°C) and in continuous service to 1700°F (925°C)
• Grade 316L is more resistant to carbide precipitation.

STAINLESS STEEL 316L STRIP WELDING CHARACTERISTICS:

• Excellent weldability by all standard fusion methods, both with and without filler metals.
• Heavy welded sections in Grade 316 require post-weld annealing for maximum corrosion resistance, this is not required for grade 316L.

STAINLESS STEEL 316L STRIP HEAT TREATMENT:

• Annealing temperature range is 1900 to 2100°F (1038 to 1149°C).
• Cannot be hardened by heat treatment.
• Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion.

STAINLESS STEEL 316L STRIP PROCESSING - HOT FORMING:

• Most producers recommend a maximum forging temperature between 2100°F and 2300°F
• Do not forge below 1700°F (927°C) Best
• Corrosion resistance is obtained if the forgings are given a final anneal.

STAINLESS STEEL 316L STRIP PROCESSING - COLD FORMING:

• 316/316L types being extremely tough and ductile, can be readily cold worked such as roll form, swaging, cold heading, deep drawing,
  bent, etc., without difficulty
• Severely cold formed parts should be annealed to remove stresses.

STAINLESS STEEL 316L STRIP MACHINEABILITY:

• Type 316/316L is somewhat more difficult to machine than Type 304 because of its toughness.
• 316/316L machines with chip characteristics that are tough and strong.
• Chip breakers and curlers are advised.
• As large a tool as possible and great amounts of cutting fluid should be used.
• Heavy positive feeds at low speeds should be considered since 316/316L work hardens rapidly.

Harsh steel Supplies and Exports Stainless steel 316L strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -

Harsh steel provided the Specification of Stainless steel 316L strips as below: -

• Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
• Material can be supplied in coil or length form
• Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 316L STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.

Enquiry