UNS S30900 Sheets, SS 309 Plates, AISI SS 309S Stainless Steel 309 Sheets Supplier, Manufacturer and Exporter in India
Din 1.4828 SS 309 Plates, SS UNS S30900 Sheets, Stainless Steel 309 Plates, 310 Stainless Steel 309 Sheets Suppliers in India.
STAINLESS STEEL 309 SHEETS AND PLATES GENERAL PROPERTIES:
Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.
STAINLESS STEEL 309 SHEETS AND PLATES APPLICATIONS:
Alloys 309 and 309S are used exclusively for their high temperature oxidation resistance, excellent high temperature strength, along with their resistance to creep deformation and environmental attack. Some examples include, but are not limited to:
- Heating elements
- Aircraft and jet engine parts
- Heat exchangers
- Carburizing annealing products
- Sulfite liquor handling equipment
- Kiln liners
- Boiler baffles
- Refinery and chemical processing equipment
- Auto exhaust parts
STAINLESS STEEL 309 SHEETS AND PLATES CORROSION RESISTANCE:
- Provide excellent corrosion resistance
- More resistant to marine atmospheres than Alloy 304
- Often used at higher temperatures to take advantage of their oxidation resistance
- Have high resistance to sulfite liquors
- Generally considered heat resistant alloys
- Destructive scaling temperature is approximately 2000oF
- Good scaling resistance with regard to continuous and intermittent services
STAINLESS STEEL 309 SHEETS AND PLATES HIGH TEMPERATURE CORROSION:
Alloy 309 resists high temperature corrosion in most in-service conditions. Operating temperatures are as follows:
- Oxidizing conditions (max. sulfur content–2 g/m3)
- 1922°F (1050°C) continuous service
- 2012°F (1100°C) peak temperature
- Oxidizing conditions (max. sulfur greater than 2 g/m3)
- 1742°F (950°C) maximum temperature
- Low oxygen atmosphere (max. sulfur content–2 g/m3)
- 1832°F (1000°C) maximum temperature
- Nitriding or carburizing atmospheres
- 1562–1742°F (850–950°C) maximum
The alloy does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800) in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.
STAINLESS STEEL 309 SHEETS AND PLATES FABRICATION:
- Can be roll formed, stamped, and drawn readily
- In process annealing is often required to reduce hardness and increase ductility
STAINLESS STEEL 309 SHEETS AND PLATES HEAT RESISTANCE:
- Cannot be hardened through heat treatment because the consist solely of austenite at room temperature
- Higher tensile and yield strengths that can be obtained through cold working and not followed by full annealing are not stable at the higher temperatures where these alloys are used
- Creep properties can be negatively affected by the use of cold worked material at these higher temperatures
STAINLESS STEEL 309 SHEETS AND PLATES WELDING CHARACTERISTICS:
- The austenitic class of stainless steels is generally considered to be weldable
- Generally considered to have weldability equivalent to the most common alloys of the austenitic class 304 and 304L
- Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion
STAINLESS STEEL 309 SHEETS AND PLATES CHEMICAL PROPERTIES:
| C | Mn | Si | P | S | Cr | Ni | Fe | |
|---|---|---|---|---|---|---|---|---|
| 309 | max: 0.20 | 2.0 max | 0.75 max | 0.045 max | 0.03 max | min: 22.0 max: 24.0 | min: 12.0 max: 15.0 | Balance |
| 309H | min: 0.04 max: 0.10 | 2.0 max | 0.75 max | 0.045 max | 0.03 max | min: 22.0 max: 24.0 | min: 12.0 max: 15.0 | Balance |
STAINLESS STEEL 309 SHEETS AND PLATES MECHANICAL PROPERTIES:
| Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX |
|---|---|---|---|---|
| 309/H | 40 | 30 | 40 | 217 |
STAINLESS STEEL 309 SHEETS AND PLATES PHYSICAL PROPERTIES:
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.285 | 9.0 at 32- 212°F | 30.7 at 68°F | 28.5 | 8.28 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500-2590 |
Harsh steel Supplies and Exports Stainless steel 309 strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications:-
| STAINLESS STEEL 309 SHEETS AND PLATES ,GRADES WITH THICKNESS AND WIDTH | |
|---|---|
| Thickness Range of Stainless Plate | 3/16″ Thru 6″ Thick Stainless Steel Plate |
| Common Widths of Stainless Plate Coil | 48″ Wide – 60″ Wide – 72″ Wide – 78.75″ (2 Meter) wide – 84″ wide – 96″ wide – 120″ wide & other widths upon customer request. |
| 200-300 Series Stainless Steel Grades | 202- 301 – 304 – 304L – 304L Polished – 304H – 309 – 309S – 309H – 310 – 310S – 310H – 316L – 316L Polished – 317L – 317LMN – 321 – 321H – 330 – 347 347H |
| 400 Series Stainless Steel Grades | 405 – 410 – 410S – 416 – 420 – 440C |
| Duplex Stainless Steel Grades | LDX 2101 – Duplex 2205 – Duplex 2507 |
| Precipitation Hardening Grades | 17-4PH – 17-4 H1150 (per customer request) – 15-5PH |
| Nickel Alloy Grades | Alloy 20 – Alloy 200 – Alloy 400 – Alloy 600 – Alloy 800 – Alloy 800HT – Alloy C-276 (nickel grades may require lead time) |
We export our STAINLESS STEEL 309 SHEETS AND PLATES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
