Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S20200 Sheets, SS 202 Plates, AISI SS 202 Stainless Steel 202 Sheets Supplier, Manufacturer and Exporter in India


Din 1.4373 SS 202 Plates, SS UNS S20200 Sheets, Stainless Steel 202 Plates, 202 Stainless Steel 202 Sheets Suppliers in India.

STAINLESS STEEL 202 SHEETS AND PLATES DESCRIPTION:

Type 202 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 202 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 202 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Type 202 can be substituted for Type 301 in many applications


STAINLESS STEEL 202 SHEETS AND PLATES PRODUCT FORMS:

Sheet, Strip


STAINLESS STEEL 202 SHEETS AND PLATES SPECIFICATION:

ASTM A240, A666


STAINLESS STEEL 202 SHEETS AND PLATES TYPICAL APPLICATIONS:

Typical applications for Types 202 are cookware, hose clamps, piston rings, transit car structural member, transit car roofing/siding, thermal window spacers, air bag containers, and truck trailer posts and door frames.


STAINLESS STEEL 202 SHEETS AND PLATES PROCESSING:

The annealing temperature for Type 202 is between 1850-2000°F. Rapid cooling through the carbide precipitation range (1500 – 800 o F) is necessary to keep the carbides in solution and prevent sensitization. Type 202 is not hardenable by thermal treatment; it is only hardenable by cold working.


STAINLESS STEEL 202 SHEETS AND PLATES FORMING:

Type 202 has similar bending, forming and drawing characteristics to Type 301 stainless steel


STAINLESS STEEL 202 SHEETS AND PLATES WELDING:

Type 202 can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels. Filler metal of the conventional chromium-nickel analyses can be used. Like other austenitic stainless steels where carbon is not controlled below 0.03%, Type 202 is susceptible to intergranular corrosion in the weld heat affected zone.


STAINLESS STEEL 202 SHEETS AND PLATES CORROSION:

Type 202 is resistant to a wide variety of mild to moderately corrosive environments. It has corrosion resistance approaching that of Types 301and has been successfully substituted for 304 in many mild environments.


STAINLESS STEEL 202 SHEETS AND PLATES CHEMICAL PROPERTIES:

Element Type 202
Carbon 0.15x
Manganese 5.5 - 7.5
Sulfur 0.03X
Phosphorus 0.060x
Silicon 1.0 x
Chromium 16 - 18
Nickel 3.5 -5.5
Nitrogen 0.25x

STAINLESS STEEL 202 SHEETS AND PLATES MECHANICAL PROPERTIES:

Type Yield Strength 0.2% offset (KSI) Tensile Strength (KSI) % Elongation
(2" Gauge length)
Hardness Rockwell
201 Ann 38 min. 75 min. 40% min. HRB 95 max.
201 ¼ Hard 75 min. 125 min. 25.0 min. 25 – 32 HRC (typical)
201 ½ Hard 110 min. 150 min. 18.0 min. 32 - 37 HRC (typical)
201 ¾ Hard 135 min. 175 min. 12.0 min. 37 – 41 HRC (typical)
201 Full Hard 145 min. 185 min. 9.0 min. 41 – 46 HRC (typical)

STAINLESS STEEL 202 SHEETS AND PLATES PHYSICAL PROPERTIES:

Density (lb./ in^2) @ RT   0.283
Modulus of Elasticity in Tension (psi x 10^6)   28.6
Specific Heat (BTU/o F/lb.) 32 to 212 oF 0.12
Thermal Conductivity (BTU/hr/ft^2/ft) 212oF 9.4
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) 32 to 212oF 8.7
  32 to 600oF 9.7
  32 to 1,000oF 10.2
Electrical Resistivity (micro ohms - cm) at 70oF 69
Melting Point Range (oF)   2550/2650
Oxidation Resistance - Continuous Service(oF)   1550
Oxidation Resistance - Intermittent Service(oF)   1500
STAINLESS STEEL 202 SHEETS AND PLATES ,GRADES WITH THICKNESS AND WIDTH
Thickness Range of Stainless Plate 3/16″ Thru 6″ Thick Stainless Steel Plate
Common Widths of Stainless Plate Coil 48″ Wide – 60″ Wide – 72″ Wide – 78.75″ (2 Meter) wide – 84″ wide – 96″ wide – 120″ wide & other widths upon customer request.
200-300 Series Stainless Steel Grades 202- 301 – 304 – 304L – 304L Polished – 304H – 309 – 309S – 309H – 310 – 310S – 310H – 316L – 316L Polished – 317L – 317LMN – 321 – 321H – 330 – 347 347H
400 Series Stainless Steel Grades 405 – 410 – 410S – 416 – 420 – 440C
Duplex Stainless Steel Grades LDX 2101 – Duplex 2205 – Duplex 2507
Precipitation Hardening Grades 17-4PH – 17-4 H1150 (per customer request) – 15-5PH
Nickel Alloy Grades Alloy 20 – Alloy 200 – Alloy 400 – Alloy 600 – Alloy 800 – Alloy 800HT – Alloy C-276 (nickel grades may require lead time)

We export our STAINLESS STEEL 202 SHEETS AND PLATES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 202 SHEETS & PLATES
Author Rating
5starstarstarstarstar