Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S44000 Coils, SS 440 Coils, Stainless Steel 440 Coils Supplier, Manufacturer and Exporter in India


Din 1.4125 SS 440 Coils, SS UNS S44000 Coils, Stainless Steel 440 Coils, 440 Stainless Steel Coils Suppliers in India.

STAINLESS STEEL 440 COIL GENERAL PROPERTIES:

Stainless steels are high-alloy steels which have high corrosion resistance compared to other steels due to the presence of large amounts of chromium. Based on their crystalline structure, they are divided into three types such as ferritic, austenitic, and martensitic steels. Another group of stainless steels are precipitation-hardened steels. They are a combination of martensitic and austenitic steels.

Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. Its very high carbon content is responsible for these characteristics, which make 440C particularly suited to such applications as ball bearings and valve parts.


STAINLESS STEEL 440 COIL APPLICATIONS:

Typical applications include:

  • Rolling element bearings
  • Valve seats
  • High quality knife blades
  • Surgical instruments
  • Chisels

STAINLESS STEEL 440 COIL CORROSION RESISTANCE:

Good resistance to the atmosphere, fresh water, foods, alkalies and mild acids. Best resistance in the hardened and tempered and passivated condition. A smooth polished surface also assists.

The corrosion resistance of grade 440C approximates that of grade 304 in many environments.


STAINLESS STEEL 440 COIL HEAT RESISTANCE:

Not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties by over-tempering.


STAINLESS STEEL 440 COIL HEAT TREATMENT:

Annealing – Full anneal – 850-900°C, slow furnace cool to about 600°C and then air cool. Sub-critical Annealing – 735-785°C and slow furnace cool.

Hardening – Heat to 1010-1065°C, followed by quenching in warm oil or air. Oil quenching is necessary for heavy sections. Immediately temper at 150-370°C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table.

Tempering in the range 425-565°C is to be avoided because of reduced impact resistance and corrosion resistance. Tempering in the range 590-675°C results in lower hardness (the product become machinable) and high impact resistance.


STAINLESS STEEL 440 COIL WELDING:

If welding is necessary pre-heat at 250°C and follow welding with a full anneal. Grade 420 filler will give a high hardness weld (although not as high as the 440C), but 309 or 310 will produce soft welds with higher ductility.


STAINLESS STEEL 440 COIL MACHINING:

In the annealed condition this grade is relatively easily machined; approximately the same as for high speed steel. Chips are tough and stringy so chip breakers are important. If these grades are hardened machining becomes more difficult and probably impossible.


STAINLESS STEEL 440 COIL COMPOSITION:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

440C

min.

max.

0.95

1.20

-

1.00

-

1.00

-

0.040

-

0.030

16.00

18.00

-

0.75

-

-

STAINLESS STEEL 440 COIL MECHANICAL PROPERTIES:

Tempering Temperature (°C)

Tensile Strength (MPa)

Yield Strength 0.2% Proof (MPa)

Elongation (% in 50mm)

Hardness Rockwell (HR C)

Impact Charpy V (J)

Annealed*

758

448

14

269HB max#

-

204

2030

1900

4

59

9

260

1960

1830

4

57

9

316

1860

1740

4

56

9

371

1790

1660

4

56

9

* Annealed properties are typical for Condition A of ASTM A276# Brinell Hardness is ASTM A276 specified maximum for annealed 440A, B and C.

STAINLESS STEEL 440 COIL PHYSICAL PROPERTIES:

Grade

Density (kg/m3)

Elastic Modulus (GPa)

Mean Coefficient of Thermal Expansion (mm/m/°C)

Thermal Conductivity(W/m.K)

Specific Heat
0-100°C (J/kg.K)

Electrical Resistivity (nW.m)

0-100°C

0-200°C

0-600°C

at 100°C

at 500°C

440 C

7650

200

10.1

10.3

11.7

24.2

-

460

600

STAINLESS STEEL 440 COIL POSSIBLE ALTERNATIVE GRADES:

Grade

Why it might be chosen instead of 440C

440A/B

Slightly softer and more corrosion resistant grade needed

440F

High machinability required, with same hardness and hardenability as 440C

420

Lower strength and hardness needed than any of the 440 grades

416

Higher machinability required, and the much lower hardness and strength is still adequate

Harsh steel Specializes in supplying stainless steel 440 custom slit thin gauges stainless steel coils and sheets. Our Inventory includes Company specializes in supplying custom-slit thin gauge stainless steel alloys in coil and sheet form. Our inventory includes Grades such as SS 201, SS 202, SS301, SS 304, SS 304L, SS 316, SS 316L, SS 310, SS 317, SS 347, SS 410 and SS 430. Also we supply duplex and super duplex coils. We supply, stock and export stainless steel coils thicknesses from .001" to .31" thick with slitting capabilities of widths as narrow as .020" up through 36".


  • Stainless Steel 440 coils Thickness Range: - 0.025mm – 4.00mm
  • Stainless Steel 440 coils Width: - Soft, Half Hard, Half Hard, ¾ Hard, Full Hard & Spring Hard
  • Stainless Steel 440 coils Hardness: - Minimum 3.2mm to maximum 2000mm
  • Stainless Steel 440 coils Finish: - 2B, 2D, Bright Annealed, #3 Polish, #4 Polish and more

STAINLESS STEEL COIL GRADES AVAILABLE:


  • Stainless Steel coils available in following grades :
    304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316TI, 317, 317L, 321, 321H, 347, 347H, 409, 410, 410S, 430, 202, 201
  • Nickel Alloy coils available in following grades :
    such as Monel, Nickel, Inconel, Hastalloy, Copper, Aluminium, Titanium, Tantalum, Bismuth.
  • Duplex & Super Duplex coils available in following grades :
    S31803, S32750, S32760, S31500, S32205.

We export our STAINLESS STEEL 440 COILS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 440 COILS / UNS: ASTM/ASTE S44000 / DIN: 1.4125
Author Rating
5starstarstarstarstar