Stainless Steel 309 Coils, UNS S30900 Coils Supplier & Exporter

STAINLESS STEEL 309 COIL GENERAL PROPERTIES:

Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.

STAINLESS STEEL 309 COIL APPLICATIONS:

Alloys 309 and 309S are used exclusively for their high temperature oxidation resistance, excellent high temperature strength, along with their resistance to creep deformation and environmental attack. Some examples include, but are not limited to:

• Heating elements
• Aircraft and jet engine parts
• Heat exchangers
• Carburizing annealing products
• Sulfite liquor handling equipment
• Kiln liners
• Boiler baffles
• Refinery and chemical processing equipment
• Auto exhaust parts

STAINLESS STEEL 309 COIL CORROSION RESISTANCE:

• Provide excellent corrosion resistance
• More resistant to marine atmospheres than Alloy 304
• Often used at higher temperatures to take advantage of their oxidation resistance
• Have high resistance to sulfite liquors
• Generally considered heat resistant alloys
• Destructive scaling temperature is approximately 2000oF
• Good scaling resistance with regard to continuous and intermittent services

STAINLESS STEEL 309 COIL HIGH TEMPERATURECORROSION:

Alloy 309 resists high temperature corrosion in most in-service conditions. Operating temperatures are as follows:

• Oxidizing conditions (max. sulfur content–2 g/m3)
  • 1922°F (1050°C) continuous service
  • 2012°F (1100°C) peak temperature
• Oxidizing conditions (max. sulfur greater than 2 g/m3)
  • 1742°F (950°C) maximum temperature
• Low oxygen atmosphere (max. sulfur content–2 g/m3)
  • 1832°F (1000°C) maximum temperature
• Nitriding or carburizing atmospheres
  • 1562–1742°F (850–950°C) maximum

The alloy does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800) in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.

STAINLESS STEEL 309 COIL FABRICATION:

• Can be roll formed, stamped, and drawn readily
• In process annealing is often required to reduce hardness and increase ductility

STAINLESS STEEL 309 COIL HEAT RESISTANCE:

• Cannot be hardened through heat treatment because the consist solely of austenite at room temperature
• Higher tensile and yield strengths that can be obtained through cold working and not followed by full annealing are not stable at the higher temperatures where these alloys are used
• Creep properties can be negatively affected by the use of cold worked material at these higher temperatures

STAINLESS STEEL 309 COIL WELDING CHARACTERISTICS:

• The austenitic class of stainless steels is generally considered to be weldable
• Generally considered to have weldability equivalent to the most common alloys of the austenitic class 304 and 304L
• Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion

Harsh steel Specializes in supplying stainless steel 309 custom slit thin gauges stainless steel coils and sheets. Our Inventory includes Company specializes in supplying custom-slit thin gauge stainless steel alloys in coil and sheet form. Our inventory includes Grades such as SS 201, SS 202, SS301, SS 304, SS 304L, SS 316, SS 316L, SS 310, SS 317, SS 347, SS 410 and SS 430. Also we supply duplex and super duplex coils. We supply, stock and export stainless steel coils thicknesses from .001" to .31" thick with slitting capabilities of widths as narrow as .020" up through 36".

• Stainless Steel 309 coils Thickness Range: - 0.025mm – 4.00mm
• Stainless Steel 309 coils Width: - Soft, Half Hard, Half Hard, ¾ Hard, Full Hard & Spring Hard
• Stainless Steel 309 coils Hardness: - Minimum 3.2mm to maximum 2000mm
• Stainless Steel 309 coils Finish: - 2B, 2D, Bright Annealed, #3 Polish, #4 Polish and more

STAINLESS STEEL COIL GRADES AVAILABLE: -

• Stainless Steel coils available in following grades :
  304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316TI, 317, 317L, 321, 321H, 347, 347H, 409, 410, 410S, 430, 202, 201
• Nickel Alloy coils available in following grades :
  such as Monel, Nickel, Inconel, Hastalloy, Copper, Aluminium, Titanium, Tantalum, Bismuth.
• Duplex & Super Duplex coils available in following grades :
  S31803, S32750, S32760, S31500, S32205.

We export our STAINLESS STEEL 309 COILS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.

Enquiry