UNS S40500 Hex Bars, SS 405 Hexagon Bars, AISI SS 405 Stainless Steel 405 Round Bars Supplier, Manufacturer and Exporter in India
Din 1.4002 SS 405 Hexagon Bars, SS UNS S40500 Round Bars, Stainless Steel 405 Threaded Rods, 405 Stainless Steel Cold Drawn Bars Suppliers in India.
GENERAL PROPERTIES:-
Alloy 405 is a 12% chromium stainless steel designed to be used in the as-welded condition. Unlike the other grades of 12% chromium stainless, 405 is not vulnerable to extensive hardening through air cooling from high temperatures.
Specifications: UNS S40500
APPLICATIONS:-
Applications that frequently use alloy 405 include, but are not limited to:
- Steam nozzles
- Partitions
- Annealing boxes
- Quenching racks
- Fabrications that cannot be annealed after welding
CORROSION RESISTANCE:
- Same corrosion resistance of Type 410 Steel
- Used in situations where more weldability is desired than Type 410
MACHINABILITY
- Type 405 can be easily machined due to its soft and ductile characteristics
WELDABILITY
- Can be welded using shielded fusion and resistance techniques
- Oxyacetylene is not recommended
- Post weld annealing will maximize ductility
CHEMICAL PROPERTIES:-
| C | Cr | Fe | Mn | Si | S | P | Ni | Al | |
|---|---|---|---|---|---|---|---|---|---|
| 405 | 0.08 max | min: 11.5 max: 14.5 |
balance | 1.0 max |
1.0 max |
0.03 max |
0.04 max |
0.50 max |
min: 0.1 max: 0.3 |
MECHANICAL PROPERTIES:
| Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
|---|---|---|---|---|---|
| 405 | 60 (415) |
25 (170) |
20 | 179 | 88 |
PHYSICAL PROPERTIES:
| Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | |
|---|---|---|---|---|---|
| at 68 °F | at 68 – 212°F | at 68 – 1832°F | at 200°F | at 32 – 212°F | in tension (E) |
| 0.279 | 9.2 | 20.5 | 416 | 0.11 | 28 x 106 |
HEX BARS PRODUCT OVERVEIW
| Stainless Steel Hex Bar | |
|---|---|
| Thickness Range of Flat Bar | 3/16″ thru 3″ Larger sizes available upon request |
| Grades | 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
INVENTORY:
| Size in Inches | Wt per Ft | Wt per 12′ | 303 | 304/L | 316/L | 416 |
|---|---|---|---|---|---|---|
| 3/16″ | 0.104 | 1.248 | X | X | X | X |
| 1/4″ | 0.180 | 2.160 | X | X | X | X |
| 5/16″ | 0.290 | 3.480 | X | X | X | X |
| 3/8″ | 0.410 | 4.920 | X | X | X | X |
| 7/16″ | 0.560 | 6.72 | X | X | X | X |
| 1/2″ | 0.740 | 8.880 | X | X | X | X |
| 9/16″ | 0.930 | 11.16 | X | X | X | X |
| 5/8″ | 1.150 | 13.80 | X | X | X | X |
| 11/16″ | 1.390 | 16.68 | X | X | X | |
| 3/4″ | 1.660 | 19.92 | X | X | X | X |
| 13/16″ | 1.950 | 23.40 | X | X | X | |
| 7/8″ | 2.300 | 27.60 | X | X | X | X |
| 15/16″ | 2.600 | 31.20 | X | X | X | X |
| 1″ | 2.90 | 34.80 | X | X | X | X |
| 1-1/16″ | 3.30 | 39.60 | X | X | X | X |
| 1-1/8″ | 3.700 | 44.40 | X | X | X | X |
| 1-1/4″ | 4.600 | 55.20 | X | X | X | X |
| 1-5/16″ | 5.100 | 61.20 | X | X | X | |
| 1-3/8″ | 5.600 | 67.20 | X | X | X | X |
| 1-7/16″ | 6.100 | 73.20 | X | X | X | |
| 1-1/2″ | 6.600 | 79.20 | X | X | X | X |
| 1-5/8″ | 7.800 | 93.60 | X | X | X | |
| 1-3/4″ | 9.030 | 108.36 | X | X | X | X |
| 1-7/8″ | 10.400 | 124.80 | X | X | X | X |
| 2″ | 11.80 | 141.60 | X | X | X | X |
| 2-1/4″ | 14.920 | 179.04 | X | X | X | X |
| 2-3/8″ | 16.920 | 203.04 | X | X | X | |
| 2-1/2″ | 18.42 | 221.04 | X | X | X | X |
| 3″ | 26.53 | 318.36 | X | X | X | X |
STAINLESS STEEL BAR VALUE ADDED OPTIONS:
| Stainless Steel Bar Value Added Options | |
|---|---|
| Stainless Steel Bar Polishing | Harsh Steel can polish nearly any stainless steel bar item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless steel polished bar can also be cut to size. Pitt free surfaces can also be provided. |
| Heatreating & Annealing | Some grades of stainless steel bars can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 410 stainless steel bar can also be heatreated. In some cases, secondary annealing 300 series stainless steel may be required depending on the application |
| Positive Material Identification (PMI) | Harsh Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
| UT Testing | In some cases, UT testing of the stainless steel bar may be required. We can assist you with this requirement. |
- Need 1,100 pieces of 7/8″ 303 round bar cut to 2-1/8″ long? We can process this job in a few days with our Amada CM100CNC with precise part tolerances
- Rapid cut of round bar 5/8″ thru 4″ dia
- Larger stainless bar cutting thru 26″ in diameter
- Multiple cutting stations allow us to ship cut stainless bar to size when you need it.
- Grinding and polishing available upon request
- Special heat treat requirements can also be supplied. Ask for details.
- Stainless round bars can also be polished or center-less ground to exact tolerances.
We export our STAINLESS STEEL 405 HEX BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
