Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S31703 CNC Components, SS 317L CNC Components, AISI SS 317L Stainless Steel 317L CNC Components Supplier, Manufacturer and Exporter in India


Din 2.4660 SS 317LN CNC Components, SS UNS S31703 CNC Components, Stainless Steel 317L CNC Components, 317L Stainless Steel CNC Components Suppliers in India.

STAINLESS STEEL 317L CNC COMPONENTS GENERAL PROPERTIES:

317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.


STAINLESS STEEL 317L CNC COMPONENTS APPLICATIONS:

  • Flue-gas desulfurization systems
  • Chemical process vessels
  • Petrochemical
  • Pulp and Paper
  • Condensers in power generation

STAINLESS STEEL 317L CNC COMPONENTS CORROSION PROPERTIES:

317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.


STAINLESS STEEL 317L CNC COMPONENTS WELDING:

317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.


STAINLESS STEEL 317L CNC COMPONENTS CHARACTERISTICS:

  • Improved general and localized corrosion to 316L stainless
  • Good formability
  • Good weldability

STAINLESS STEEL 317L CNC COMPONENTS CHEMICAL PROPERTIES:

Ni Cr MoMnSi
11.0 - 15.0 18.0 - 20.0 3.0 - 4.0 2.0 Max .75 Max
CNSPFe
0.03 Max 0.1 Max 0.03 Max 0.045 Max Balance

STAINLESS STEEL 317L CNC COMPONENTS MECHANICAL PROPERTIES:

Ultimate Tensile Strength, ksi Minimum .2% Yield Strength, ksi Minimum Elongation Percent Hardness Max.
75 30 35 217 Brinell
Description: Valve related cnc products and vmc components
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per Diagram and requirement
Finish: As per requirement
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Spool CNC components
Material: Stainless steel  202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per Diagram and requirement
Finish: As per requirement
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Medical Implants, Bone screw, pedicle screws, pins, plates and other implants Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Plugs and Exotic Fasteners with unique designs and sizes
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements and all types of coating available
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Shaft and pins
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description:  Precision CNC and VMC sheet metal components, Top Rollers, Spray nozzles, Instrumentation fittings  as per drawings
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Aerospace parts such as adapters, flanges, knobs, couplings, fittings, ferrules, brackets, clamps, connectors, hoses, Elbows, Tees, shafts, Nipples, Hex plugs etc
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s drawings and requirements
Finish: As per clients drawings and requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Industrial Precision CNC and VMC components for motorsports, automotives, bicycle components, energy and power, oil and gas equipments etc.
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s drawings and requirements
Finish: As per clients drawings and requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.

We export our STAINLESS STEEL 317L CNC COMPONENTS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 317L CNC COMPONENTS
Author Rating
5starstarstarstarstar