Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S15500 Flat Bars, Precipitation Hardening SS 15-5PH Flat Bars, AISI SS 15-5PH Stainless Steel 17-7PH Flat Bars Supplier, Manufacturer and Exporter in India


Din 1.4545 SS 15-5PH Flat Bars, SS UNS S15500 Flat Bars, Precipitation Hardening Stainless Steel 17-7PH Flat Rods, Precipitation Hardening Stainless Steel 15-5PH Flat Bars Suppliers in India.

Stainless steel 15 – 5 PH, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.


The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulphur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.


UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.


HEAT TREATED PRECIPITATION HARDENING STAINLESS STEEL 15-5PH FLAT BAR:

Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:

  • Conditioning using austenite.
  • Air cooling, which turns the austenite into martensitic.
  • Precipitation hardening until the desired condition is reached.

Harsh steel provides the following 15-5ph products as below:-

  • Conditioning using austenite.
  • Air cooling, which turns the austenite into martensitic.
  • Precipitation hardening until the desired condition is reached.

Harsh steel provides the following 15-5ph products as below:-


  • Sheet and Plate
  • AMS 5862
  • BMS 7-240
  • Bar/Forging
  • AMS 5659
  • ASTM-A-484
  • ASTM-A-564

15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.


Harsh steel also carries a number of other stainless steel alloys, including347 Stainless, A-286, 321 Stainless, 13-8 MO, AM 350, 17-4 PH Stainless,15-7 MO, 17-7 PH Stainless and 410 Stainless.


Industries that use 15500 include:

  • Aerospace
  • Chemical
  • Food processing
  • General metal working
  • Paper industries
  • Petrochemical

Products partially or completely constructed of 15500 include:

  • Aircraft components
  • Cylinders
  • Engine parts
  • Fittings
  • Gears
  • Hallow shafts
  • Marine gas turbine compressor sections
  • Paper mill equipment
  • Shafts
  • Valves

Material Type Condition Ultimate Tensile Strength (PSI) 0.2% Yield Strength (PSI) Elongation (% In 2in.) Reduction Of Area (%) Hardness Brinell Hardness Rockwell
15-5 PH H900 190,000 170,000 6 15 388 C40
  H1025 155,000 145,000 8 27 331 C35
  H1075 145,000 125,000 9 28 311 C32
  H1150 135,000 105,000 11 30 277 C28
  H1150-M 115,000 75,000 14 35 255 C24
  • Width:25mm to 60mm
  • Thickness:5mm to 12mm
  • Finish :Hot Rolled Annealed & Pickled (HRAP)
  • Length:3 to 6 Meters / 12 to 20 feet
  • End Finish :Both ends are marked with special colors.
  • Size tolerance:A276/484 / DIN 1028 (Full specification mentioned below)
  • Packing:Bars are packed in 1000 to 1,200 kgs bundles in waterproof HDPE cloths, Standard Export Seaworthy, Marking of Sizes, Grade, Net Wt, Gross Wt, No of pieces, POD, Origin should Mentioned on Each bundles
  • Marking:Size, Grade, Manufacture name on Each Bars/Pieces
  • Delivery:60-75 Days from the order finalization
  • Marking:Size, Grade, Manufacture name on Each Bars/Pieces
  • Grades:AISI 304 / 304L, 201, 202, 316

We export our PRECIPITATION HARDENING STAINLESS STEEL 15-5PH FLAT BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
PRECIPITATION HARDENING STAINLESS STEEL 15-5PH FLAT BAR
Author Rating
5starstarstarstarstar