Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S41008 Bolts, SS 410S Bolts, AISI SS 410S Stainless Steel 410S Bolts Supplier, Manufacturer and Exporter in India


Din 1.4000 SS 410S Bolts, SS UNS S41008 Bolts, Stainless Steel 410S Bolts, 410S Stainless Steel Bolts Suppliers in India.

Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.


STAINLESS STEEL 410S BOLTS APPLICATIONS:


  • Petroleum Refining and Petrochemical Processing
  • Columns
  • Distillation trays
  • Heat exchangers
  • Towers
  • Ore Processing
  • Mining machinery
  • Thermal Processing
  • Annealing boxes
  • Partitions
  • Quenching racks
  • Gate valves
  • Press plates

STAINLESS STEEL 410S BOLTS OXIDATION RESISTANCE:

  • Good oxidation resistance.
  • Can be used in continuous service up to 1300°F (705°C).
  • Scaling becomes excessive above 1500°F (811°C) in intermittent service.

STAINLESS STEEL 410S BOLTS CORROSION RESISTANCE:

  • Corrosion resistance of 410S stainless steel is similar to type 410.
  • Resists corrosion in atmospheric conditions, fresh water, mild organic and mineral acids, alkalis and some chemicals.
  • Exposure to chlorides in everyday activities (e.g., food preparation, sports activities, etc.) is satisfactory when proper cleaning is performed after exposure to use.

STAINLESS STEEL 410S BOLTS HEAT TREATMENT:

The alloy can not be hardened by heat treatment. It is annealed between 1600 – 1650°F (871 – 899°C), and then air cooled to relieve cold working stresses. 410S should not be exposed to temperatures above 2000°F (1093°C), due to embrittlement. If large grains are found after annealing mildly cold-worked material, the annealing temperature should be decreased to 1200 – 1350°F (649 – 732°C).


STAINLESS STEEL 410S BOLTS WELDING:

410S is generally considered to be weldable by the common fusion and resistance techniques. Special attention should be given to avoid brittle weld fractures during fabrication; this includes minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part somewhat before forming. 410S is generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade 409. A major difference can be attributed to the addition of alloy, to control hardening which results in the need for higher heat input during welding.


STAINLESS STEEL 410S BOLTS CHEMICAL PROPERTIES:

C Mn Si P S Cr Ni
410S 0.08 max 1.00 max 1.00 max 0.04 max 0.03 max min: 11.5
max: 14.5
0.60 max

STAINLESS STEEL 410S BOLTS MECHANICAL PROPERTIES:

Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Rockwell B) MAX
410S 64.4 (444) 42 (290) 33 75

STAINLESS STEEL 410S BOLTS PHYSICAL PROPERTIES:

Density
lbm/in3
Thermal Conductivity
(BTU-in/hr- ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.280 187 at 212°F 23.7 at 68°F 29 6.0 at 32 – 212°F 0.11 at 68°F to 212°F 2700 to 2790
7.5 at 68 – 1200°F

STAINLESS STEEL GRADES:

Grades 18-8, 303, 304, 304L, 316, 316L, 309, 310, 317L, 321, 330, 347, 410, 420, 430, 17-7PH


STAINLESS STEEL 410S BOLTS AND SCREWS:


ANSI/ASME B18.2.1, B18.3, B18.5, B18.6.2 ASTM A193, A320, F593, F837, F879, F880
HEX HEAD CAP SCREWS, HEAVY HEX BOLTS, T-HEAD BOLTS, LAG SCREWS
CARRIAGE BOLTS, ELEVATOR BOLTS, WEDGE ANCHOR BOLTS
SOCKET SCREWS: SOCKET CAP, FLAT AND BUTTON HEAD, SHOULDER SCREWS, SET SCREWS

STAINLESS STEEL 410S MACHINE AND TAPPING SCREWS:

ANSI/ASME B18.6.1, B18.6.3, B18.6.4
MACHINE, SHEET METAL, THREAD CUTTING, SELF-DRILLING

STAINLESS STEEL 410S NUTS:


ANSI/ASME B18.2.2, B18.17, ASTM A194, F594, IFI 128
JAM, FINISHED, HEAVY, COUPLING, WING, NYLON INSERT, SERRATED FLANGE,
SLOTTED (CASTLE), ACORN (CAP), KEPS

STAINLESS STEEL 410S WASHERS:


ANSI/ASME B18.21.1, B18.22.1, B18.23.1
FLAT, LOCK, BEVELED, EXTERNAL AND INTERNAL TOOTH, COMPRESSION, SAE

STAINLESS STEEL 410S THREADED ROD:


ASTM A193, A320, F593, IFI 136
3-6-12 FOOT LENGTHS
STUDS: GENERAL PURPOSE, STUD BOLTS, DOUBLE END, SINGLE END

STAINLESS STEEL 410S TURNBUCKLES:

STAINLESS STEEL 410S BENT BOLTS AND EYE BOLTS:


ANSI/ASME B18.15, IFI 136
J-BOLTS, HOOK BOLTS, CLOSED AND OPEN EYE BOLTS, FORGED EYE BOLTS

STAINLESS STEEL 410S HINGES, NAILS, PINS AND CHAINS:

PIPE SUPPORTS, CLAMPS AND STRAPSMSS-SP58, SP69, FIGURE 137
U-BOLTS, CLEVIS HANGERS, RISER CLAMPS, BEAM CLAMPS, 3-BOLT CLAMPS, SHORT STRAPS


Titanium fasteners are among the most commonly manufactured at Harsh Steel. Often known for its light weight, titanium also possesses excellent mechanical properties, able to resist hostile environments, and is used commonly in offshore engineering projects.


Titanium
Grade Common Name Related Specification
    British European ASTM UNS
Grade1   3.7025 B348 R50250
Grade2     3.7035 B348 R50400
Grade3     3.7055 B348 R50550
Grade5     3.7165 B345 R56400
Grade7     3.7235 B348 R52400
Grade11     3.2250 B348 R52250

Harsh Steel produces duplex fasteners in all grades of duplex, to customer specification. Duplex grades are a mixed microstructure of Austenite and Ferrite, combining the properties of both (hence the name DUPLEX). Duplex stainless steels have high corrosion resistance as well as a high strength. Mechanical properties are around double that of a typical austenitic grade such as 316. They would also normally offer higher stress cracking resistance in Chloride solutions for example. They are composed typically of 22% Chromium, 5 % nickel. Having worked with duplex since its outset, the duplex bolting continues to account for a core part of our business, along with Super duplex.


Duplex
Alloy Common Name Related Specifications
    European UNS ASTM/ASME
Alloy 2205 SAF 2205 ® 1.4462 S32205 F60
31803 31803 1.4462 S31803 F51

We are proud that Harsh Steel is the world’s number one bespoke producer of Super Duplex bolting. Super Duplex stainless steel grades are similar to standard duplex, but they contain a higher content of Chromium, thus enhancing the corrosion resistance and mechanical properties. Harsh Steel produces fasteners in all three types of Super Duplex.

Super Duplex

Alloy Common Name Related Specification
    European UNS ASTM/ASME
Alloy 255 Ferralium 255 ® 1.4507 S32550 F61
Zeron 100 Zeron 100 ® 1.4501 S32760 F55
Alloy 2507 SAF 2507 ® 1.4410 S32750 F53

Harsh Steel started off producing Stainless Steel bolting in its formative years, and although the company has since diversified into more exotic materials, we continue to offer Stainless Steels and they continue to be an important part of our business, especially if customers require non-standard bolting: i.e. non-standard sizes, special specification, or otherwise difficult to find. We offer all grades of stainless steels, be it Austenitic, Ferritic or Martensitic.


Stainless Steels / Others
Grade Related Specification
  British European ASTM UNS
304/304L BS 970 1.4301/1.4306 A193 B8, A320 B8   S 30400 / S30403
310 BS 970 1.4841 A479 S 31000 S 31008
310S BS 970 1.4845 S 31008
316/316L BS 970 1.4401 A193 B8M, A320 B8M S 31600 / S31603
317/317L BS 970 1.4449/1.4438 S 31700 / S31703
321 BS 970 1.4541 A193 B8T S 32100
347 BS 970 1.4550 A193 B8C, A320 B8C S 34700
410 BS 970 1.4006 S 41000
431 BS 970 1.4057 S 43100
174PH   1.4562 S 14700
660 A/B/C/D   1.4980 A453 K 66286
254 SMO ®   1.4547 S 31254
C63000   B150 C63000
904L   1.4539 N08904
Zirconium 702   R60702
Zirconium 705   R60705

Harsh Steel’s substantial experience in working with high nickel alloys bolting is crucial as they are extremely difficult materials to machine and can require various forms of additional treatment to ensure full conformity. Related by their high percentage of nickel in their composition, these highly corrosion-resistant materials are widely used in the petrochemical and offshore sector, and are often better known by their registered trade names (e.g. Inconel®, Hastelloy®, Monel® and Nimonic®).


High Nickel Alloys
Alloy Common Name Related Specification
    British European ASTM UNS
Alloy 600 Inconel 600 ® BS 3076 NA 14 2.4816 B166 N06600
Alloy 601 Inconel 601 ®   2.4627 B166 N06601
Alloy 625 Inconel 625 ® BS 3076 NA 21 2.4856 B446 N06625
Alloy 718 Inconel 718 ®   1.4668 B637 N07718
Alloy 750 Inconel 750 ®   2.4669 B637 N07750
Alloy 400 Monel 400 ®  BS 3076 NA13 2.4360 F467 N04400
Alloy K500 Monel K500 ®  BS 3076 NA18 4.4375 B865-04 N05500
Alloy C276 Hastelloy C276 ® 2.4819 B574 N10276
Alloy 22 Hastelloy C22 ® 2.4602 B574 N06022
Alloy B2 Hastelloy B2 ® B335 N10665
Alloy X Hastelloy X ® 2.4655 B572 N06002
Alloy B3 Hastelloy B3 ® 2.4600 B335 N10675
Alloy G30 Hastelloy G30 ® 2.4603 B581 N06030
Alloy 50 Nitronic 50 ® A479 XM-19 S20910
Alloy 60 Nitronic 60 ® A193 B8S S21800
Alloy 75 Nimonic 75 ®   2.4951 B637 N06075
Alloy 80A Nimonic 80A ® BS 4882 NA20 2.4952 B637 N07080
Alloy 90 Nimonic 90 ® B408 N07090
Alloy 800 Incoloy 800 ® BS 3076 NA15 1.4876 B408 N08800
Alloy 800H Incoloy 800H ® B408
Alloy 800 HT Incoloy 800HT ® 1.4959 B408 N08811
Alloy 825 Incoloy 825 ®  BS 3076 NA16 2.4858 B425 N08825
Alloy 925 Incoloy 925 ® B805 N09925
Alloy DS Incoloy DS ® BS 3076 NA17 1.4862 N08330

STAINLESS STEEL 410S INCONEL  BOLTS:

We produce inconel fasteners in several grades. Inconels are austenitic nickel-chromium superalloys. They are used in extreme environments, often in gas turbines, nuclear reactors and natural gas processing plants.


STAINLESS STEEL 410S HASTELLOY BOLTS:

Hastelloy bolts & nuts can be most effective under high temperatures and corrosive environments, with high stress resistance.


STAINLESS STEEL 410S MONEL  BOLTING:

HARSH STEEL manufactures Monel fasteners in A400 and K500. Monel grades are nickel-copper based alloys and have high corrosion resistance and strength properties. They are often used in valves, pumps and heat exchangers.


STAINLESS STEEL 410S INCOLOY  BOLTS:

HARSH STEEL produces various grades of Incoloy bolts & nuts. Another of the superalloys, it is used in extreme environments.


STAINLESS STEEL 410S NITRONIC BOLTS:

Nitronic grade fasteners have excellent corrosion resistance properties and strength. It has low magnetic permeability and excellent cryogenic properties.


Harsh Steel has released it own special Super Duplex Fastener Specification Our range of fasteners are manufactured using quality material that are known for high tensile strength and durability. These industrial fasteners are offered with Manufacturer Test Certificate as per EN 10204 / 3.1B. We offer industrial fasteners in different grades such as industrial washers, industrial screws, stainless washers and stainless screws. Available in different sizes, our range of fasteners can be customized as per the specifications of our clients.


STAINLESS STEEL 410S FASTENERS:

Harsh Steel is amongst the leading manufacturers of quality Stainless Steel Fasteners. These industrial stainless steel fasteners are made using top grade rust resistant steel to provide long life service. Widely used in different industries like defense industry, shipbuilding industry, chemical industry, fertilizer industry, petrochemical industry, refineries and steel plant, these industrial stainless steel fasteners are available in various grades and sizes as per the requirements of our clients.


STAINLESS STEEL 410S SPECIFICATIONS:


  • Standard : ASTM / ASME A/SA 193 / 194
  • Grade : B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4


STAINLESS STEEL 410S FORM:


  • Bolts : Bolts stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, J bolts, mushroom head square neck bolts, t- head bolts, wing screw, eye bolt, eye bolt, foundation bolts and structural bolts
  • Washer : Plain washer , plain big & small OD washer , spring lock washer , spring washer heavy duty , tooth washer , star washer , tab washer with one & two tab
  • Nuts : Hexagon nuts, hexagon coupling nuts, hexagon thin nut, square nut, hexagon castle nuts, self locking nut, hexagon domed cap nuts
  • Screw : Pan head slotted screws, cheese head slotted screws, countersunk head slotted screws, countersunk raised head slotted screws, pan phillipse head screw, countersunk Phillipse raised head screws, slotted cheese trim head machine screws, socket head allen cap screws, allen countersunk socket head cap screws, socket head shoulder screws, socket head cap screw low head, hexagon socket set screw with flat point, hexagon socket set screws with cone point, hexagon socket set screw with dog point, hexagon socket set screws with dog point, hexagon socket set screws with cup point, imprial socket cap screws
  • Other : Threaded rod, as per drawing and customers spec. coating, hot dipped galvanizing, phosphate, Teflon, xylon, zinc, cadmium.

We export our STAINLESS STEEL 410S BOLTS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 410S BOLTS
Author Rating
5starstarstarstarstar