AMS 5510 UNS S32100 Square Bars, SS 321 Square Bars, AISI SS 321 Stainless Steel 321 Square Bars Supplier, Manufacturer and Exporter in India
Din 1.4541 SS 321 Square Bars, SS UNS S32100 Square Bars, Stainless Steel 321 Square Bars, 321 Stainless Steel Square Bars Suppliers in India.
GENERAL PROPERTIES:-
Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 – 1500°F (427 – 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low temperature toughness.
Alloy 321H (UNS S 32109) is the higher carbon (0.04 – 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000oF (537°C). In most instances, the carbon content of the plate enables dual certification.
Alloy 321 cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.
APPLICATIONS:-
- Aerospace – piston engine manifolds
- Chemical Processing
- Expansion Joints
- Food Processing – equipment and storage
- Petroleum Refining – polythionic acid service
- Waste Treatment – thermal oxidizers
CORROSION RESISTANCE:-
- exhibits good general corrosion resistance that is comparable to 304.
- developed for use in the chromium carbide precipitation range of 1800 – 1500°F (427 – 816°C) .
- can be used in most diluted organic acids at moderate temperatures .
- can be used in pure phosphoric acid at lower temperatures.
- can be used in up to 10% diluted solutions at elevated temperatures.
- resists polythionic acid stress corrosion cracking in hydrocarbon service.
- utilized in chloride or fluoride free caustic solutions at moderate temperatures.
- does not perform well in chloride solutions, even in small concentrations, or in sulfuric acid service.
HOT FORMING:-
- Working temperatures of 2100 – 2300°F (1149 – 1260°C) are recommended for forging, upsetting and other hot working processes.
- Alloy not suitable for work at temperatures below 1700°F (927°C).
- Material must be water quenched or fully annealed after working to re-attain maximum corrosion resistance.
COLD FORMING:-
- Quite ductile and forms easily.
WELDING:-
- Readily welded by most standard processes.
- Post weld heat treatment is not necessary
MACHINING:-
- Hardening rate of 321 makes it less machinable than 410 stainless steel, but similar to 304
CHEMICAL PROPERTIES:-
| % | Cr | Ni | C | Si | Mn | P | S | N | Ti | Fe |
|---|---|---|---|---|---|---|---|---|---|---|
| 321 | min:17.0 max:19.0 |
min: 9.0 max:12.0 |
max:0.08 | max:0.75 | max:2.0 | max:0.045 | max:0.03 | max:0.10 | min:5*(C+N) max:0.70 |
Balance |
| 321H | min:17.0 max:19.0 |
min: 9.0 max:12.0 |
min:0.04 max:0.10 |
min:18.0 max:20.0 |
max:2.0 | max:0.045 | max:0.03 | max:0.10 | min:5*(C+N) max:0.70 |
Balance |
MECHANICAL PROPERTIES
| Grade | Tensile Strength ksi (min.) |
Yield Strength 0.2% Offset ksi (min.) |
Elongation - % in 50 mm (min.) |
Hardness (Brinell) MAX |
|---|---|---|---|---|
| 321 | 75 | 30 | 40 | 217 |
PHYSICAL PROPERTIES
| Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | |
|---|---|---|---|---|---|
| at 68 °F | at 68 – 212°F | at 68 – 1832°F | at 200°F | at 32 – 212°F | in tension (E) |
| 0.286 | 9.2 | 20.5 | 9.3 | 0.12 | 28 x 106 |
SQUARE BAR PRODUCT OVERVIEW:-
| Stainless Steel Square Bar | |
|---|---|
| Thickness Range of Stainless Plate | 3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST) |
| Grades | 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
INVENTORY:-
- X = Stocked Item
- P = Call For availability square bar can be cut to size.
- Square bar can be polished per customer specifications.
- Square bar is stocked in Penn met 2000 for improved machinability.
| Size in Inches | Wt per Ft | Wt per 12′ | 303 | 304/L | 316/L | 416 |
|---|---|---|---|---|---|---|
| 3/16″ | 0.120 | 1.440 | X | X | X | P |
| 1/4″ | 0.210 | 2.52 | X | X | X | P |
| 5/16″ | 0.330 | 3.96 | X | X | X | X |
| 3/8″ | 0.480 | 5.76 | X | X | X | X |
| 7/16″ | 0.650 | 7.80 | X | X | X | X |
| 1/2″ | 0.850 | 10.20 | X | X | X | X |
| 9/16″ | 1.080 | 12.96 | X | X | X | X |
| 5/8″ | 1.330 | 15.96 | X | X | X | X |
| 3/4″ | 1.910 | 22.92 | X | X | X | X |
| 7/8″ | 2.610 | 31.32 | X | X | X | X |
| 1″ | 3.400 | 40.80 | X | X | X | X |
| 1-1/8″ | 4.310 | 51.72 | X | X | X | X |
| 1-1/4″ | 5.320 | 63.84 | X | X | X | X |
| 1-3/8″ | 6.400 | 76.80 | X | X | X | X |
| 1-1/2″ | 7.600 | 91.20 | X | X | X | X |
| 1-3/4″ | 10.400 | 124.80 | X | X | X | X |
| 2″ | 13.600 | 163.20 | X | X | X | X |
| 2-1/4″ | 17.200 | 206.40 | X | X | X | X |
| 2-1/2″ | 21.300 | 255.60 | X | X | X | X |
| 3″ | 30.63 | 367.56 | X | X | X | P |
| 4″ | 54.40 | 652.80 | X | X | X | P |
PROCESSING:-
Customers can select a number of processing options to produce stainless steel bars to their exact specifications, reducing materiel costs, production time, scrap and internal handling.
| Long Product Processing Services Overview | |
|---|---|
| Square Bar Cutting | Products cut include Round Bar, Flat bar, Hex bar, Square bar, Tubing and Hollow Bar, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter |
| Square Bar Production Cutting | Penn Stainless can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances. |
| Square Bar Polishing | Products polished included all tubular products, with OD & ID polishing available, Round Bar, Square Bar, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes. |
TOLERANCES FOR COLD AND HOT SQUARE BARS
COLD FINISHED SQUARE BAR TOLERANCES:
| CF Tolerances | Plus | Minus |
|---|---|---|
| 1/8″ to 5/16″ (exclusive) | 0.000 | 0.002 |
| 5/16″ to 1/2″ (exclusive) | 0.000 | 0.003 |
| 1/2″ to 1″ (inclusive) | 0.000 | 0.004 |
| over 1″ to 2″ (inclusive) | 0.000 | 0.006 |
| over 2″ to 3″ (inclusive) | 0.000 | 0.008 |
COLD FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)
HOT FINISHED SQUARE BAR TOLERANCES:
| HF Tolerances | Plus | Minus | Out of Sq |
|---|---|---|---|
| Over 7/8″ to 1″ (inclusive) | 0.009 | 0.009 | 0.013 |
| Over 1″ to 1-1/8″ (inclusive) | 0.010 | 0.010 | 0.015 |
| Over 1-1/8″ to 1-1/4″ (inclusive) | 0.011 | 0.011 | 0.016 |
| Over 1-1/4″ to 1-3/8″ (inclusive) | 0.012 | 0.012 | 0.018 |
| Over 1-3/8″ to 1-1/2″ (inclusive) | 0.014 | 0.014 | 0.021 |
| Over 1-1/2″ to 2″ (inclusive) | 1/64 | 1/64 | 0.023 |
HOT FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)
STAINLESS STEEL SQUARE BAR SPECIFICATIONS:
| Stainless Steel Square Bar Specifications | |
|---|---|
| ASTM A276 | This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. |
| ASTM A479 | This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels. |
| ASTM A484 | This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions. |
| ASTM A582 | This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels. |
| ASTM B473 | This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition. |
We export our STAINLESS STEEL 321 SQUARE BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
