Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S31700 Flanges, SS 317 Flanges, AISI SS 317 Stainless Steel 317 Flanges Supplier, Manufacturer and Exporter in India


Din 1.4449 SS 317 Flanges, SS UNS S31700 Flanges, Stainless Steel 317 Flanges, 317 Stainless Steel 317 Flanges Suppliers in India.

GENERAL PROPERTIES:-

317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.


APPLICATIONS:-

  • Flue-gas desulfurization systems
  • Chemical process vessels
  • Petrochemical
  • Pulp and Paper
  • Condensers in power generation

CORROSION PROPERTIES:-

317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.


WELDING:-

317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.


CHARACTERISTICS:-

  • Improved general and localized corrosion to 316L stainless
  • Good formability
  • Good weldability

CHEMICAL PROPERTIES:-

Ni Cr MoMnSi
11.0 - 15.0 18.0 - 20.0 3.0 - 4.0 2.0 Max .75 Max
CNSPFe
0.03 Max 0.1 Max 0.03 Max 0.045 Max Balance

MECHANICAL PROPERTIES:-

Ultimate Tensile Strength, ksi Minimum .2% Yield Strength, ksi Minimum Elongation Percent Hardness Max.
75 30 35 217 Brinell
TYPES AND SPECIFICATIONS:
ASME/ANSI B16.5 Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
Pressure Class 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B16.47 Welding Neck Flange, Blind Flange (Series A & B)
Pressure Class 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 (Orifice Flanges) Welding Neck Flange, Slipon Flange, Threaded Flange
Pressure Class 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Flange (111/134), Hubbed Slipon Flange (112), Hubbed Threaded Flange (113), Lapped Pipe End Flange (133), Plate Flange (101), Loose Plate Flange (102), Loose Plate with Weld-neck Flange (104), Blank Flange (105)
Pressure Class PN 2.5 to PN 100
Din Flanges DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
Pressure Class PN 6 to PN 100
ANFOr NFE 29-230 Plate Flange (01), loose Plate Flange (02, 03, 04), Blind Flange (05), Welding Neck flange (11), Hubbed Slip on Flange (12), Screwed Flange (13),Hubbed Socket Welding Flange (14), Loose Hubbed Flange (15) Integral Flange (21)
Pressure Class Iso - PN 2.5 to PN 40
Pr EN 1092-1 Flanges Plate Flange (01), Loose Plate Flange (02, 04), Blind Flange (05), Welding Neck Flange (11), Hubbed Slip on flange (12), Screwed Flange (13), Integral Flange (21)
Pressure Class PN 2.5 to PN 100
ASME/ANSI B 16.9/MSS SP-4 Stub End
Type A, B, C
Metal Grade UNS Number
Austenitic / Ferritic / Austenitic / Stainless Steel F304 / F304H / F304L *
F309*
F310* / F310H*
F316 / F316H / F316L*
F317 / F317L*
F321 / F321H*
F347 / F347H*
F51 (2205)* / F60*
F53 (2507)*
F446*
S30400 / S30409 / S30403
S30900
S31000 / S31009
S31600 / S31609 / S31603
S31700 / S31700
S32100 / S32109
S34700 / S34709
S31803 / S32205
S32750
S44600
Ferritic / Martensitic Alloys F1*
F5 / F5 A*
F6 CL 1, 2, 3, 4, (F410)*
F9*
F11 CL 1, 2, 3*
F22 CL 1, 3*
F91*
F12 CL 2*
K12822
K41545 / K42544
S41000
K90941
K11597 / K11572
K21590
K90901
K11564
Nickel & Nickel Based Alloys Nickel 200*
Nickel 201*
Alloy 400*
Alloy 600*
Alloy 601
Alloy 625
Alloy 800 / 800H / 800HT*
Alloy 825*
Alloy 904L*
Alloy 20*
Alloy C276*
N02200
N02201
N04400
N06600
N06601
N06625
N08800 / N08810 / N08811
N08825
N08904
N08020
N10276
Low Temperature Alloys LF - 1*
LF - 2*
LF - 3*
A707 L3*
A694 F42 - F65*
A350 LF6*
K03009
K03011
K32025


Aluminum Alloys Alum 3003*
Alum 6061
A93003
A96061
Copper - Nickel Alloys 70/30
90/10
C71500
C70600
GRADES
ASTM 304/304L/304H, 316/316L/316H, 317/317L, 321/321H, 347/347H, 316Ti, F51
DIN WNR 1.4541, WNR 1.4571, WNR 1.4301, WNR 1.4306, WNR 1.4307, WNR 1.4401, WNR 1.4404, WNR 1.4438, WNR 1.4462
AFNOR (NF E) BF Z 3 CN 19-09, BF Z 7 CN 18-09, BF Z 6 CNT 18-10, BF Z 3 CND 17-11-02, BF Z 7 CND 17-11-02, BF Z 6 CNDT 17-12, BF Z 6 CNDNb 18-12

STAINLESS STEEL FLANGES

A wide variety of stainless steel flanges are all available at CCTF, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.


GRADES A316/316L and A304/304L

FLANGE
  • Weld Neck
  • Sch10, Sch40 and Sch80 Bore
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

FLANGE
  • Slip-On
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

flange
  • Threaded
  • Classes 150 & 300
  • Sizes: ½" to 4"

flange
  • Lap Joint
  • Class 150 only
  • Sizes: 2" to 6"

flange
  • Blind
  • Classes 150 & 300
  • Sizes: ½" to 12"

flange
  • Hub Blind
  • Classes 300, 600, 1500
  • Sizes: ½" to 6"

flange
  • Socket Weld
  • Sch40 & Sch80 Bore
  • Classes 150, 300, 600
  • Sizes: ½" to 2"

We export our STAINLESS STEEL 317 FLANGES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 317 FLANGES
Author Rating
5starstarstarstarstar